預約手持雷射焊接試機專線,公司:鋒耘焊接設備手機:0955905192 羅先生
項目 | 計算單位 | 內容 |
額定電壓和相數 Rated input voltage & phase |
V | 220, 1/3Φ 380, 3Φ 415, 3Φ |
電壓變動範圍 Input voltage range |
% | ±20% |
額定頻率 Input voltage frequency |
% | 50 & 60 |
額定入力 Input at rated load |
KVA | 10.3 |
KW | 9.5 | |
額定出力電壓 Rated output voltag |
VDC | TIG: 24AC,22DC |
STICK: 30DC | ||
額定輸出電流(A) Rated output current(A) |
ADC | AC TIG:10~300 |
DC TIG:4~300 | ||
STICK: 10~300 | ||
功率因數 Power factor |
% | 92 |
效率 Efficiency |
% | 83 |
空載電壓 Open circuit voltage |
VDC | 66DC/130AC |
電流緩升時間 Up slop time |
Sec | 0~10 |
電流緩降時間 Down slop time |
Sec | 0~10 |
延遲送氣時間 After-flow time |
Sec | 1~20 |
氣體預送時間 Pre-flow time |
Sec | 0.05~5 |
點焊時間 Spot time |
Sec | 0.1~50 |
脈波電流 Pulse current |
A | 10~300 |
脈波頻率 Pulse frequency |
HZ | 0.1~2000 |
脈波時間比率 Weld duty |
% | 10~90 |
清潔弧 Clean duty |
% | 5~50 |
交直流混合頻率 Mix frequency |
HZ | 0.1~20 |
交流頻率 AC frequency |
HZ | 40~250 |
交直流混合比率 Mix duty |
% | 50 |
使用率(30℃, 10mins ) 1st Duty cycle(30℃, 10mins ) |
% | 60 |
持續使用電流 Continued output current |
ADC | 232 |
水冷控制 Water cool control |
- | V |
氬∕空氣點檢 Argon/ air check |
- | V |
制御控制 Crater control |
- | Crater/ Repeat |
絕緣等級 Insulation class |
- | H |
防護等級 Protection Class |
- | IP21S |
外型尺寸(W*D*H) Dimension (W*D*H) |
mm | 300*565*670 |
重量 Weight |
kg | 50 |