預約手持雷射焊接試機專線,公司:鋒耘焊接設備手機:0955905192 羅先生
項目 | 計算單位 | 內容 |
額定電壓和相數 Rated input voltage & phase |
V | 220, 1/3Φ 380, 3Φ 415, 3Φ |
電壓變動範圍 Input voltage range |
% | ±15% |
額定頻率 Input voltage frequency |
% | 50 & 60 |
額定入力 Input at rated load |
KVA | 22.91 |
KW | 21.33 | |
額定出力電壓 Rated output voltag |
VDC | TIG: 30AC,30DC |
STICK: 36DC | ||
額定輸出電流(A) Rated output current(A) |
ADC | AC TIG:25~500 |
DC TIG:10~500 | ||
STICK: 10~400 | ||
功率因數 Power factor |
% | 93 |
效率 Efficiency |
% | 70 |
空載電壓 Open circuit voltage |
VDC | 67DC/120AC |
電流緩升時間 Up slop time |
Sec | 0.1~5 |
電流緩降時間 Down slop time |
Sec | 0.1~5 |
延遲送氣時間 After-flow time |
Sec | 2~15 |
氣體預送時間 Pre-flow time |
Sec | 0.2~5 |
點焊時間 Spot time |
Sec | 0.1~5 |
脈波電流 Pulse current |
A | 10~500 |
脈波頻率 Pulse frequency |
HZ | High:7.5~500 |
Low:0.4~27 | ||
脈波時間比率 Weld duty |
% | 20~80 |
清潔弧 Clean duty |
% | 20~50 |
交直流混合頻率 Mix frequency |
HZ | 0.7~10 |
交流頻率 AC frequency |
HZ | - |
交直流混合比率 Mix duty |
% | 20~80 |
使用率(30℃, 10mins ) 1st Duty cycle(30℃, 10mins ) |
% | 60 |
持續使用電流 Continued output current |
ADC | 387 |
水冷控制 Water cool control |
- | V |
氬∕空氣點檢 Argon/ air check |
- | V |
制御控制 Crater control |
- | Crater/ Repeat |
絕緣等級 Insulation class |
- | H |
防護等級 Protection Class |
- | IP21S |
外型尺寸(W*D*H) Dimension (W*D*H) |
mm | 305*660*565 |
重量 Weight |
kg | 70 |